Credit goes to ??? for the featured picture.
__
– Name : teotoko’s RSVP Mod
– Creator : Teotoko
– Length : 19 cm
– Weight : Medium
– Insert : Yes
– Link : teotoko’s RSVP Mod (UPSB)
– Modding : Easy
– Pens :
– 1 HGG (Grip + Tip)
– 2 Pentel Hybrid Gel Roller (HGR) / Uni-Ball Signo (2 tips)
– 1 Pilot G2 / SuperGrip (Grip)
– 1 Pilot G3 (Cap)
– Tutorial :
1- Cut and file the G3 cap clip. Put the Signo /HGR tip inside.
2- 
Cut 0.5 cm of the HGG grip as shown.
3- 
Put the remaining grip inside the G3 cap as shown.
4- 
Drill a hole on the RSVP backcap and wrap some tape around it.
5- Put an insert inside the RSVP barrel.
6- 
Put RSVP inktube upside down into the barrel, screw the backplug back on and put the G3 cap.
7-
Put the 0.5 cm section of HGG grip on the front of the RSVP barrel. Screw the HGG tip onto the front of the RSVP barrel.
8- 
Wrap some electric tape above it.
9- Put the Signo / HGR tip onto the RSVP front.
10- Add the G2 grip to the front of the RSVP
Comment :
It’s a gorgeous mod, and the stuff needed is pretty common to find !
jtrouve plus l’article donc je poste ici ><
tu devrais rajouter le soschie g3 mod et le mirror mod ^^
fleme de poster le tuto, tu trouvera fastoche dans google xD
bravo pour ce super site =)
bonne continuation les gars =)
ta oublié le g3 dans le matos :p
on est obligés d’avoir un cap de g3 ?
a la limite je pense que tu peux mettre un cap de inkgel, mais si tu change le cap tu change le mod, donc tu n’es pas “obligé” de mettre un cap de G3 mais a ce moment la tu n’aura plus le même mod.