Featured picture : credit goes to Tes.
– Name : Factes-1
– Creator : Tes
– Length : 28cm
– Weight : Heavy
– Insert : No
– Weblink : Factes-1 Tutorial (Discord)
– Difficulty : Medium
– Stuff :
– 1 Comssa (Barrel)
– 2 Pentel ColorTwin(Barrels)
– 2 Pilot Opt./Nextage Mechanical Pencil (Tips)
– 1 Uni Signo DX(Grip)
– 2 Zebra Hyperjell (Grips)
– 2 Daiso(Grip, same as Paru Bullet)
– 4 Pilot Supergrip(2 whole grips, 2×4 rings grips)
– 2 Anyball (2x 2 block grip)

.
– Tutorial :
1- Disassemble Factis bodies
2- Cut 4cm of Comssa body (tip side)
3- Cut 1cm of Signo DX grip and put on Comssa
4- Cut 3cm of CT/ACT (tip side) and sand ~1cm (tip side)
5- Connect CT/ACT with Factis (stripe side); only ~2cm of CT/ACT should be visible
6- Put Hyperjell on CT/ACT; push until it touches the FIRST stripe on Factis
7- Put Supergrip on Hyperjell (ring side first); stretching grip/lubricant/segmenting makes it easier
OPTIONAL: Use pliers to pull out Hyperjell in case you squished it while putting Supergrip on
8- Insert the inverted Nextage/OPT tip into grips; it should be flush with the Hyperjell
9- Cut excess Supergrip (smooth side) so that entire “cap” section is 3.4cm
10- Cut off 1 block of Daiso grip and place the rest over Supergrip
11- Put 2 blocks of Anyball and 4 rings of Supergrip on Factis body
12- Repeat for other side Assemble all parts
13- Check image or video tutorial if confused
– Comment :
Tes won the Mod of the Month contest (january25) on IPMC discord with his Factes-1 mod, which has a nice looking.
– Video