Credit goes to iMatt for the featured picture.

__

– Name : iMaker

– Creator : iMatt

– Length : 19.1 cm

– Weigth : Moyen / lourd

– Insert : Yes

– Link : iMaker (UPSB)

– Modding : Medium difficulty

– Pens list :

– 1 RSVP ( All )
– 1 G3 (Cap)
– 2 HGG (1 Grip + 2 Tips)
– 2 HGR / 1 Signo ( Tip[s] )
– 1 Uni-ball JetStream ( Tip )

– Tutorial :

1- Remove the RSVP backcap and file the back until you can screw the jetstream tip on.

2- File the back of the jetstream tip.

3- Screw two HGG tips on the JetStream tip. Screw the jetstream tip on the back of the RSVP. Cut 1,6 cm of the RSVP grip and put it on the HGG tips.

4- Put a toothpick in the rsvp inktube to increase its length of 0,5 cm, and put the inktube in the RSVP body.

5- Cut the RSVP clip. Put a 2,5×2,5 insert in the cap.

6- Put a 4,25×2,5 insert on the jetstream-HGG-RSVP grip part.

7- Put the RSVP cap on the 6- step insert. It’s very difficult to do it well, be smooth and calm.

8- Put an HGG grip on the RSVP undergrip. Add an RSVP ring on and at the end of the HGG grip.

9- Cut 3,9 cm of the G3 cap.

10- Cut 0.9 cm of the RSVP grip and put it on the signo tip/the 2 HGR grips.

11- Put the 10- step part and put it in the G3 cap.

12- Put an insert around the HGG grip and add the G3 cap on.

– Comment :
Beautiful mod, but very expensive…