Eyo AEI

Featured picture : credit goes to Eyo.

– Name : Eyo AEI

– Creator : Eyo

– Length : 20cm

– Weight :  15-16g

Insert : No

– Weblink : Eyo’s tutorial

– Difficulty : Medium

– Stuff :

– 1 Animal Erase it!(Body)
– 2 Uni-Ball Signo(tips)
– 2 Tombow ABT(Caps)
– 1 Edding 661 (Body)
– 1 Bic round stic(Body)
– 1 Random Aliexpress pen(Caps)
 

– Tutorial :

1- Cut a ~1 cm long section of the Tombow abt caps (from the top of the cap). Sand the interior of the cap if plastic nubs remain.

2- Remove the caps from the aliexpress pen and cut/sand the one with clip.

3- Cut out two 0.9 cm long sections of the edding 661 barrel and remove the printing on them with alcohol or nail polish remover.

4- Assemble the tipstack like such: Signo > Aliexpress Pen > Edding 661 section (Sanding the outside of the cap might have to be necessary)

5- Put the tip section inside the ABT cap (into the section that was not cutted) (Putting a bit of masking tape on the aliexpress cap so it does not fall out.)

6- Put the Primark Ballpoint grips over the cap structure.

7- Screw of the tipped part of the AEI and cut out a 0.5cm long section off the screwed side of the barrel (be careful). Now cut out a 2cm long section off the bic round stick and put it into there. (Sanding the bic barrel might be necessary to avoid stretching the AEI barrel) (Putting a bit of superglue on the bic barrel is recommanded)

8- Put a bit of tape around the 2 ends of AEI barrel, then assemble the caps.

Complete!

– Comment :
Note from Eyo: “I would describe it like a slofis color but with a more bt like feeling (barrel feels like those hug me pens) and slicker because there aren’t as many bumps.

It also has longer grips at the end and a heavier body making it a mod that would be great for a style that utilizes more wiper tricks.

It’s inspired by the Nanafushi bt (no clue how it spins but i liked the look)” This mod can be seen used in GPC Express of march 2024

With opaque grips:

Categories
Latest Posts
Ads