Featured picture : credit goes to Pen Meeting Place.

– Name :  Nishin G3

– Creator : Nishin

– Length : 19.5 cm

– Weight :  12.23 g

– Insert : Yes

– Weblink : Pen Meeting Place (Japanese)

– Difficulty : Easy

– Stuff :

– Tutorial :

1- Remove the plastic piece from inside the Frixion Colors cap, keep the rubber nub on the cap

2- Cut the Color Twin barrel to 4 cm from the front (trim if necessary)

3- Put the HGG tip on the tip of the Color Twin barrel, wrap an insert around the barrel and put it into the cap

4- File the inside of one of the G3 tips (if not the mod will be longer than expected)

5- Clear the front of the G3 barrel (remove grip, sand down the small squares and front)

6- Tip stack G3 tip> hollowed G3 tip> Signo tip

7- Cut 1 cm of Hyper Jell grip and put it onto the G3 front, followed by a whole HGG grip

8- Add some D1-K grip onto the Frixion barrel to adjust the balance

9- Add some tape to the back of the G3 barrel, add an insert into the G3 barrel and connect the cap to the barrel

Complete!

– Comment :
*Most recent edition of the mod replaces the following parts:
D1-K grip is changed to Anyball grip
Hyper Jell grip on the front is changed to 1.6 cm of Signo DX grip