A13x Bullet Mod - The Pen Modding Wiki

Featured picture : credit goes to VORE-TEX.

– Name : A13x Bullet mod

– Creator : A13X

– Length : 21-23 cm

– Weight : Variable depending on what tips you use

– Insert : No

– Weblink : VORE-TEX’s Youtube, Pen Gathering Place (Japanese)

– Difficulty : Medium

– Stuff :

-1 Giotto Turbo Maxi (Barrel)

-1 BIC Velleda 1741 or Visacolor XL (Cap)

-1 Edding 661 (Cap) (can be subbed by Crayola Fabric Marker cap)

-1 or 2 French Dr. Grip (Grips) (Usual Japanese ones are fine)

-1 Papermate Supermagic+ (Barrel) (very old version, can be subbed by small CT cap or 4 cm of CT width barrel)

– Some black grips (VT uses RSVP and Supergrip grips)

-2 Bullets (or heavy tips) (original ones are a secret, both ends used different bullets)

– Tutorial :

1- Empty your Giotto barrel

2- Cut the front of the Giotto barrel to 1 cm

3- Cut your Velleda caps to 3.5 cm from the base of the cap (hollow the inside of the cap if you are using long bullets as the tips)

4- Cut your Supermagic+ barrel to ~4 cm and connect it to the Edding cap

5- Add some tape to the Supermagic barrel and plug it into the back of the Giotto barrel

6- Cut 2 2 cm pieces of Dr. Grip grip

7- Cut a 2 block section and a 4 block section of Supergrip grip from the front

8- Cut off the ring of the RSVP grip and cut it at the base of the second dimple from the back (refer to video)

9- Put the RSVP grip ring and put it on the front of the Giotto barrel

10- Add some tape to the front of the Giotto barrel and put the cut Velleda cap onto the Giotto front

11- Invert your longer piece of RSVP grip and put it onto the Velleda cap followed by the 2 blocks of Supergrip grip and the Dr. Grip grip

12- Invert the other RSVP grip section and put it on the Edding cap followed by the 4 blocks of Supergrip grip and the Dr. Grip grip

13- Put some tape onto your bullets and put them into the caps

Complete

– Comment :

An iconic mod, used by A13x in WT13 and was the first mod to pioneer the use of bullets in pen mods. The original tips used are kept a secret by A13x, and its unclear what exact grips he used as well. Take note that the parts used are the older variants and a fully legit replica is very hard if not impossible to achieve. This is also actually an asymmetrical mod despite what it looks like on the outside.