Featured picture : credit goes to 50snakes. (the record featured is Red Sparowes – At the Soundless Dawn)

– Name :  Watto DC

– Creator : Watto

– Length :  20.7 cm

– Weight :  16.3 g

– Insert : Yes (the caps)

– Weblink : -Nil-

– Difficulty : Easy

– Stuff :

– Tutorial :

1- Disassemble your PC2s, keep the backplugs and cut one of the barrels to 2.15 cm from the back

2- Put the backplugs into the cut section of the PC2 barrel with the tip portion of the backplug facing outwards

3- Disassemble the Supertips and cut the barrels to 5.8cm from the back

4- Connect the Supertip barrels from the back with Step 2

5- Hollow the Color Twin caps

6- Put a G3 grip into the CT caps smooth side in until it can not go in any further

7- Cut off the excess G3 grip that is not in the CT cap

8- Remove the G3 grip in the cap and out them back in reversed (the striped portion goes in first now)

9- Put a Signo tip inverted into the CT cap into the G3 grip (the G3 grip holds the Signo tip in place)

10- Cut the Sailor Gel caps to 2.5 cm

11- Put 1 block of G3 grip onto the CT cap followed by the cut Sailor cap. Add an insert under the Sailor cap if you want

12- Cut 2 6 block sections of G3 grip

13- Put the 6 block section of G3 grip on top of the CT cap (held by the Sailor cap)

14- Cut 1 or 2 blocks of Anyball grip and put it over the exposed G3 grip

Repeat for other side and complete!

– Comment :

You may need more G3 grips than expected