Featured picture : credit goes to 50snakes.

– Name :  Pixel’s MX

– Creator : Pixels

– Length :  20.2 cm

– Weight :  15.3 g

– Insert : Yes

– Weblink : Pixel’s MX tutorial post on UPSB

– Difficulty : Easy

– Stuff :

– Tutorial :

1- Cut the clip of your Jimnie cap (if using Hyper Jell, remove the entire clip portion by sawing it off)

2- Cut 4 blocks of Anyball grip and put it on the cap

3- Put a Signo tip into the HGG grip and put the grip into the cap

4- Cut ~6mm of Jimnie grip and place it onto the screw threads on the back of the RSVP (with backplug removed)

5- Place the cap onto the Jimnie grip

6- Cut ~0.9 cm of Signo Broad grip and put it onto the front of the RSVP barrel

7- Tip stack RSVP front> Plastic G3 tip> Signo tip (wrap tape around the tips if required)

8- Put the G2 grip on the front of the RSVP barrel, covering the tip stack (flat part of the grip facing outwards)

9- Add an insert into the RSVP barrel

Complete

– Comment:

A heavier, more balanced RSVP mod

Note: Pixels stated that he used Jimnie Gel, (most likely referring to Jimnie Gel Rollerball/ Hyper Jell) and removed the entire clip to make it into a Jimnie