Credit goes to kAtts for the feature picture.
– Name : kAtts Acrylic Bullet
– Creator : kAtts
– Length : 22-23cm
– Weight : 38g
– Insert : Yes
– Link : kAtts YT
– Making : Easy
– Pens list :
– 1 Acrylic pipe ( 13x11mm, 20cm long )
– 2 defused Natto bullet 7,62X51mm (Tips)
– 1 Hyperjell ( Grip )
– 1 Airblanc ( Grip : 2 pieces of 1cm)
– 1 Dr.Grip ( 2 pieces of 1-1.5cm (you can choose))
– Anyballs (Grips)
– Tutorial :
1- Add 2×2 Anyball grip, your dr.grip piece and 1×2 anyball grip :
2- Take 1 piece of 8 blocks of your anyball and put it as shown (timecode 1:40) :
3- Put your airblanc grip inside of the pipe.
4- Add the inverted natto tip inside the airblanc grip :
5- Put a piece of hyperjell grip onto the natto tip :
6- Above hyperjell grip, put a piece of 3 blocks of Anyball grip (the rear of the grip) :
7- Turn back the anyball grip of the step 2- :
8- Finish by adding more Anyball grips onto the step 7- :
– Comment :
kAtts acrylic bullet is the thickest penmod in penspinning (13mm of Outside diameter) for now.
The aesthetic is very interesting since you can choose the color you want from the insert and the wide variety of Anyball colors.
– Video :