P4P3RON mod

Featured picture : credit goes to Aceron

– Name : P4P3RON mod

– Creator : Aceron

– Length : 20cm

– Weight : 11g

– Outsert : Yes

– Weblink : >FPSB V4<

– Difficulty :  Easy

– Stuff :

– 2 A4 Paper sheets
– Tape
Optional : outsert
Recommended : any refill to help you to roll the paper on itself

Stuff price : Around 0 USD

– Tutorial :

0- Please download those pictures below from the following links :
http://myreader.toile-libre.org/uploads/My_50b3ba1adc458.pdf
http://myreader.toile-libre.org/uploads/My_50b3b9f11dd73.pdf

Print them (or draw the lines from your A4 paper sheets) so you can get 2 sheet :

1- Cut with scissors, x acto knife, scalpel or cutter the 9 parts.

2- Take the part 1, and roll as shown. I recommend you to use a refill to help you. Use tape at the end to block the paper :

3- Take the 4 and 5 parts and roll them onto the barrel (part 1). Use tape once again :

4- Take the parts 8 and 9, roll them very tiny (do not use refill this time) and use tape :

5- Take the 6 and 7 parts and roll them onto the 8/9 parts and then, tape :

6- The paper pipes 2 and 3 are composed of four pieces each. Cut as shown below :

Attach four of them like that :

Roll the 4×1 (previous picture) onto the part 8 or 9.

And tape :

7- You should get all of those pieces :

How to assemble ?

8- Put 2 and 3 onto 8 and 9 (add some tape if needed) :

9- Add the 6 and 7 onto the step 8- :

10- Add the 4 and 5 onto the step 9- :

11- Put the step 10- onto the barrel :

12- Now you know how to assemble, you can add the outsert you want on it =)

Made by TacTic, an old french penspinner

– Comment :
The most interesting paper mod I know so far, made by Aceron in 2012, an old genius french penmodder.
He succeed to create a penmod full of paper, that looks like a real penmod.

Comments
All comments.
Comments