ShinRa Color Mod

Featured picture : credit goes to .

– Name : ShinRa Color Mod

– Creator : ShinRa

– Length :  21.5 cm (4 Signo tips used) (variable) (varies based on how many Signo tips used)

– Weight :  18 g (4 Signo) (variable) (28g for 8 Signos)

Insert : No

– Weblink : ShinRa’s Youtube

– Difficulty : Medium

– Stuff :

-2 Live Color (Barrels) (original used Mycolor, can also be subbed by Playcolor 2/K)
-2 Pilot Supergrip (Grips)
-2 to 8 Uni-Ball Signo (Tips) (ShinRa uses 4 tips)
-2 Dong-a Anyball (Grips) (14-16 block sections)
-2 Quantum Geloplus Spirit 1233 (Grips) (can be subbed by HGG grips or similar)
-1 Pentel Color Twin (Backplug) (or use the Mycolor backplug or the backplug from the barrels you used)

– Tutorial :

1- Fully disassemble the Live Colors

2- Cut off the tip of the Live Color barrels

3- Stack half of your Signo tips together for each end

4- Cut the Quantum grips (length depends on how many tips you use) (Cut the grips to 1.5 cm if you are using 2 tips on each side)

5- Push the tip stack inverted into the cut Quantum grip

6- Put the whole Supergrip grip onto the Live Color barrels (smooth part goes onto the barrel first, place the grips on the cut end of the barrel) (how far you push the grip onto the barrel depends on how many tips you use) (refer to video)

7- Push the tip package into the Supergrip grip

8- Cut 2-3-2 block sections of Anyball grip from the back (number of sections depends on how many tips you use)

9- Place the Anyball grip sections onto the Supergrip grip

10- Connect both ends together with the Color Twin backplug (one end of the backplug needs a 3-4 cm long strip of tape wrapped on it to fit snugly)


– Comment :