Featured picture : credit goes to Vore-Tex.

– Name : Bonzin Ballsign mod (Noel ver.)

– Creator : Bonzin/Noel

– Length : 20.5 cm

– Weight : ?

– Insert : Yes

– Weblink : Vora’s Youtube

– Difficulty : Easy

– Stuff :

– Tutorial :

1- Cut your HGR grip in half

2- Cut your Dr. Grips in half (if using 2, use the halves with the lip on it)

3- Cut off the Supergrip stripes

4- Cut off two 3 blocks sections of Sailor grip

5- Put a HGR grip half onto the front of PC2 cap

6- Insert a Penzgear ring into the HGR grip

7- Put a Signo tip into the HGR grip, above the Penzgear ring

8- Slide on a Dr. grip half over the HGR grip, lip side out

9- Put on the Supergrip stripes onto the cap followed by the Sailor grip

10- Repeat for the other cap

11- Clear the Ballsign barrel and put in an insert

12- Double cap the Ballsign barrel with the caps

Complete,

– Comment :
This mod is highly praised for its high momentum and its aesthetic spin effect
Notes:
-HGR grip can be subbed by Silver HGG/ Signo Broad grip (You might need two Signo Broad grips, one is not enough)
-There is no official insert for the mod, its just some lines drawn on a piece of paper

– Video