Credit goes to TUv4 for the featured picture.
– Name : Nectalios
– Creator : TUv4
– Length : 20.8cm
– Weight : 19g
– Outsert : No
– Weblink : TUv4’s blog
– Difficulty : Easy
– Stuff :
– 1 Stalogy Ballpoint (Body)
– 2 CT ( Big Caps)
– 2 Japanese Dr.Grip shaker (Tips)
– 2 Pentel VFeel (Grips)
– 1 Signo DX (Grip)
– 2 Old Sarasa (Grips)
– 1 Knock type gel ink ballpoint pen (Grips) :
– Tutorial :
1- Hollow your CT caps. Cut off the tip of the DGT. Sand down the clips of the caps. Put the whole VFeel grip onto the CT cap and put the DGT into the grip :
2- Cut 15mm x2 of the Knock grip. Cut 5mm x2 of the Signo DX.
Turn over the knock grip and attach above the 5mm of the DX grip.
3- Combine the step 1 and 2 together :
4- Cut your old sarasa grip to ~14mm x2 and put it over the step 3. Stretch the grip a bit with pliers if needed :
5- Optional : Wrap a thin stripe of electrical tape as shown below. The cap is done 🙂
6- Empty the Stalogy body and put the caps on each side of the body. Your Nectalios is done !
Details of the cap :
– Comment :
The personal mod of tuv4 used for famous penspinning CVs such as Japen 15th and Dance Above the Floor. It is a kind of advanced Dr.BT. If you like rough body mod, try it out !
– Video :